Рубрика: Заметки

sudo apt-get install rtorrent screen apache2 php5-cgi php5-common php5-sqlite php5-xmlrpc sqlite unzip php5-curl

# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Maximum and minimum number of peers to connect to per torrent.
min_peers = 1
max_peers = 1000

# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 100

# Maximum number of simultanious uploads per torrent.
#max_uploads = 15

# Global upload and download rate in KiB. «0» for unlimited.
download_rate = 800
upload_rate = 500

# Default directory to save the downloaded torrents.
directory = /media/raid/download/all/

# Default session directory. Make sure you don’t run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /media/raid/rtorrent/

# Watch a directory for new to rrents, and stop those that have been
# deleted.
schedule=watch_directory_1,5,10,»load_start=/media/raid/download/links/all/*.torrent,d.set_directory=/media/raid/download/all/,d.set_custom1=/media/raid/soft/»
schedule=watch_directory_2,5,10,»load_start=/media/raid/download/links/soft/*.torrent,d.set_directory=/media/raid/download/soft/,d.set_custom1=/media/raid/soft/»

on_finished = move_complete,»execute=mv,-u,$d.get_base_path=,$d.get_custom1= ;d.set_directory=$d.get_custom1=»

#schedule =watch_directory,5,5,load_start=/media/raid/download/links/*.torrent

schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=1000M

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.

# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,»stop_on_ratio=200,200M,2000″

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 6890-6900

# Start opening ports at a random position within the port range.
port_random = yes

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes

# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip’s.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to «disable» (completely disable DHT), «off» (do not start DHT),
# «auto» (start and stop DHT as needed), or «on» (start DHT immediately).
# The default is «off». For DHT to work, a session directory must be defined.
#
dht = auto

# UDP port to use for DHT.
#
dht_port = 6901

# Enable peer exchange (for torrents not marked private)
#
peer_exchange = yes

#
# Do not modify the following parameters unless you know what you’re doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
scgi_port = localhost:5000
safe_sync = yes

#!/bin/sh
#############
######
#############
# This script depends on screen.
# For the stop function to work, you must set an
# explicit session directory using ABSOLUTE paths (no, ~ is not absolute) in your rtorrent.rc.
# If you typically just start rtorrent with just «rtorrent» on the
# command line, all you need to change is the «user» option.
# Attach to the screen session as your user with
# «screen -dr rtorrent». Change «rtorrent» with srnname option.
# Licensed under the GPLv2 by lostnihilist: lostnihilist _at_ gmail _dot_ com
##############
######
##############

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the «.».
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# user = user
# will not work
# system user to run as
user=»vini»

# the system group to run as, not implemented, see d_start for beginning implementation
# group=`id -ng «$user»`

# the full path to the filename where you store your rtorrent configuration
config=»`su -c ‘echo $HOME’ $user`/.rtorrent.rc»

# set of options to run with
options=»»

# default directory for screen, needs to be an absolute path
base=»`su -c ‘echo $HOME’ $user`»

# name of screen session
srnname=»rtorrent»

# file to log to (makes for easier debugging if something goes wrong)
logfile=»/var/log/rtorrentInit.log»
#######################
###END CONFIGURATION###
#######################
PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC=»rtorrent»
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

checkcnfg() {
exists=0
for i in `echo «$PATH» | tr ‘:’ ‘\n’` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo «cannot find rtorrent binary in PATH $PATH» | tee -a «$logfile» >&2
exit 3
fi
if ! [ -r «${config}» ] ; then
echo «cannot find readable config ${config}. check that it is there and permissions are appropriat$
exit 3
fi
session=`getsession «$config»`
if ! [ -d «${session}» ] ; then
echo «cannot find readable session directory ${session} from config ${config}. check permissions» $
exit 3
fi
}

d_start() {
[ -d «${base}» ] && cd «${base}»
stty stop undef && stty start undef
su -c «screen -ls | grep -sq «\.${srnname}[[:space:]]» » ${user} || su -c «screen -dmUSfa ${srnname} 2>&$
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c «screen -ls | grep -sq «\.${srnname}[[:space:]]» » ${user} || su -c «sg \»$group\» -c \»screen -f$
su -c «screen -S «${srnname}» -X screen rtorrent ${options} 2>&1 1>/dev/null» ${user} | tee -a «$logfile$
}

d_stop() {
session=`getsession «$config»`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: ‘{print($2)}’ | sed «s/[^0-9]//g»`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn’t belong to another process
kill -s INT ${pid}
fi
}

getsession() {
session=`cat «$1» | grep «^[[:space:]]*session[[:space:]]*=» | sed «s/^[[:space:]]*session[[:space:]]*$
echo $session
}

checkcnfg

case «$1» in
start)
echo -n «Starting $DESC: $NAME»
d_start
echo «.»
;;
stop)
echo -n «Stopping $DESC: $NAME»
d_stop
echo «.»
;;
restart|force-reload)
echo -n «Restarting $DESC: $NAME»
d_stop
sleep 1
d_start
echo «.»
;;
*)
echo «Usage: $SCRIPTNAME {start|stop|restart|force-reload}» >&2
exit 1
;;
esac

exit 0